Tag: manufacturing (page 1 of 3)

Vacuum Metastability Event

June 12, 2017 / / 0 Comments

Clearing of the Chimera group continues. The Light forces have completed „certain operations“ and are now intensively dissolving the head of the Yaldabaoth entity.

The head is positioned within the plasma anomaly accretion vortex close to the surface of planet Earth with its outer edge about 3 Earth radii from the planetary center, as it is described here in detail:





Mainstream science has „discovered“ that outer edge a few years ago:


Now NASA has openly admitted that man-made low frequency radio waves are forming that outer edge, efficiently creating the outermost barrier of the Veil:



If you change „VLF transmitters for submarine communication“ in the above article to „ELF transmitters of the HAARP and similar programs“ you will get a clear picture how the outermost barrier of the Veil is generated.

Anomalous plasma filaments of the Yaldabaoth head together with toplet bombs are coupled with the black stone, a top quark-antiquark condensate. Black stone is a big hadron made of top/antitop quarks that were created by the Chimera millions of years ago in huge particle accelerators (Dyson rings) that were able to produce temperatures above the critical temperature of 2 trillion Kelvin, needed for black stone creation.

For about 7 million years, the black stone was located on a planet orbiting Rigel star system (which was the center of the cosmic anomaly during that time) and was then brought to Earth from Rigel through the Taurus cloud plasma filament in 1996:


It is now located in the Chimera underground facility near RHIC collider on Long Island.

Interaction of anomalous plasma with the back stone creates a huge negative plasma vortex about 500 miles in diameter with its center on Long Island:



This vortex is the purification station for remaining primary anomaly on the surface of the planet. Top members of the Cabal and many members of the Chimera are using the anomaly of this vortex as a shield against the Light and this is why the East Coast has the highest concentration of the Cabal on the planet.

Positioning Cintamani stones in a flower of life pattern inside this vortex will serve as a vectoring grid for the energies of Sirius and will accelerate the transmutation of this anomaly. It is also beneficial to flood that vortex with the Violet flame:



It is interesting to note there are Atlantean underwater pyramids built by the Pleiadians located not far away from Long Island:



These pyramids serve as the positive anchor point that counteracts the negative effects of the Long Island plasma vortex.

The Light forces are now working directly to disable the black stone and remove the remaining toplet bombs and the progress is going according to the plan.

The removal of the black stone will tip the cosmic equilibrium and the current metastable state of false vacuum will cease to exist:


False vacuum we are currently experiencing is a metastable sector of the universe where the interaction between the Source and the primary anomaly creates conditions that are pro-entropy and anti-life and are the underlying reason why quarantine Earth status and the existence of evil is even possible.

Removal of the black stone will create the vacuum metastability event that will allow the penetration of bubble nucleation front across the Veil boundary towards the surface of the planet and will effectively trigger the Event. The Event is the moment of instating true quantum vacuum conditions inside the Veil and thus the removal of the part of the primary anomaly that is directly responsible for the existence of evil. The underlying force that was allowing the existence of the Cabal and suffering will cease to exist.

Meanwhile, Operation PrisonBreak continues with soft Disclosure about extraterrestrial life:



And with public space program initiatives that will put humanity beyond the Veil:



Victory of the Light!


View Article Here Read More

Dept. of Defense Agency DARPA Confirms Thought to Computer Technology Research

January 22, 2016 / / 0 Comments

New effort aims for fully implantable devices able to connect with up to one million neurons

(Note from Greg: Implantable devices does not in any way imply mechanical or physical implants are necessary. Ex-CIA scientist Dr. Robert Duncan states in his book Project: Soul Catcher, wireless implantable brain to computer technology already exists and is in use.)  


From DARPA's official website
outreach@darpa.mil
1/19/2016

A new DARPA program aims to develop an implantable neural interface able to provide unprecedented signal resolution and data-transfer bandwidth between the human brain and the digital world. The interface would serve as a translator, converting between the electrochemical language used by neurons in the brain and the ones and zeros that constitute the language of information technology. The goal is to achieve this communications link in a biocompatible device no larger than one cubic centimeter in size, roughly the volume of two nickels stacked back to back.

The program, Neural Engineering System Design (NESD), stands to dramatically enhance research capabilities in neurotechnology and provide a foundation for new therapies.

“Today’s best brain-computer interface systems are like two supercomputers trying to talk to each other using an old 300-baud modem,” said Phillip Alvelda, the NESD program manager. “Imagine what will become possible when we upgrade our tools to really open the channel between the human brain and modern electronics.”

Among the program’s potential applications are devices that could compensate for deficits in sight or hearing by feeding digital auditory or visual information into the brain at a resolution and experiential quality far higher than is possible with current technology.

Neural interfaces currently approved for human use squeeze a tremendous amount of information through just 100 channels, with each channel aggregating signals from tens of thousands of neurons at a time. The result is noisy and imprecise. In contrast, the NESD program aims to develop systems that can communicate clearly and individually with any of up to one million neurons in a given region of the brain.

Achieving the program’s ambitious goals and ensuring that the envisioned devices will have the potential to be practical outside of a research setting will require integrated breakthroughs across numerous disciplines including neuroscience, synthetic biology, low-power electronics, photonics, medical device packaging and manufacturing, systems engineering, and clinical testing. In addition to the program’s hardware challenges, NESD researchers will be required to develop advanced mathematical and neuro-computation techniques to first transcode high-definition sensory information between electronic and cortical neuron representations and then compress and represent those data with minimal loss of fidelity and functionality.

To accelerate that integrative process, the NESD program aims to recruit a diverse roster of leading industry stakeholders willing to offer state-of-the-art prototyping and manufacturing services and intellectual property to NESD researchers on a pre-competitive basis. In later phases of the program, these partners could help transition the resulting technologies into research and commercial application spaces.

To familiarize potential participants with the technical objectives of NESD, DARPA will host a Proposers Day meeting that runs Tuesday and Wednesday, February 2-3, 2016, in Arlington, Va. The Special Notice announcing the Proposers Day meeting is available at https://www.fbo.gov/spg/ODA/DARPA/CMO/DARPA-SN-16-16/listing.html. More details about the Industry Group that will support NESD is available at https://www.fbo.gov/spg/ODA/DARPA/CMO/DARPA-SN-16-17/listing.html. A Broad Agency Announcement describing the specific capabilities sought is available at: http://go.usa.gov/cP474.
DARPA anticipates investing up to $60 million in the NESD program over four years.

NESD is part of a broader portfolio of programs within DARPA that support President Obama’s brain initiative. For more information about DARPA’s work in that domain, please visit: http://www.darpa.mil/program/our-research/darpa-and-the-brain-initiative.

View Article Here Read More

Chronic Illness Begins With Breakdown In Your Gut

May 26, 2015 / / 0 Comments

Dr. Ben Kim, GuestGood overall health begins with a healthy gut. Chronic illness begins with breakdown in the gut.This is where I typically start with clients looking to address any health challenge.If you’re looking for lasting improvement in any area of your health, it’s best not to think of your body parts as being independent compartments. Every cell communicates with every other cell, not always directly, but via the fluids, hormones, and neurotransmitters that trave [...]

View Article Here Read More

NASA Challenges People to Come Up With Designs for Mars Habitat –

May 18, 2015 / / 0 Comments





Excerpt from perfscience.com

The space agency NASA has asked public to submit designs for a Mars habitat. NASA, along with the National Additive Manufacturing Innovation Institute, is holding a competition to design and build a 3-D printed habitat for deep space explorations like journey to Mars.  The multi-phase 3-D Printed Habitat Challenge has been specifically designed to advance the additive construction technology that is needed to develop sustainable housing solutions for earth and beyond.  As per experts, shelter is among most basic and crucial requirement for humans but carrying bulks of material to build up a habitat during a deep space mission would unnecessarily take the place in cargo that could be used for something important.  The first phase of the competition that was announced on Saturday will run through September 27. This phase calls on participants to develop state-of-the-art architectural concepts that take advantage of the unique capabilities 3-D printing offers.  The top 30 submissions will be considered and judged. Also winners will be awarded with prize money of $50,000 at the 2015 World Maker Faire in New York.  Sam Ortega, Centennial Challenges program manager, said, “This challenge definitely raises the bar from what we are currently capable of, and we are excited to see what the maker community does with it”... 
The space agency NASA has asked public to submit designs for a Mars habitat. NASA, along with the National Additive Manufacturing Innovation Institute, is holding a competition to design and build a 3-D printed habitat for deep space explorations like journey to Mars.
The multi-phase 3-D Printed Habitat Challenge has been specifically designed to advance the additive construction technology that is needed to develop sustainable housing solutions for earth and beyond.
As per experts, shelter is among most basic and crucial requirement for humans but carrying bulks of material to build up a habitat during a deep space mission would unnecessarily take the place in cargo that could be used for something important.
The first phase of the competition that was announced on Saturday will run through September 27. This phase calls on participants to develop state-of-the-art architectural concepts that take advantage of the unique capabilities 3-D printing offers.
The top 30 submissions will be considered and judged. Also winners will be awarded with prize money of $50,000 at the 2015 World Maker Faire in New York.
Sam Ortega, Centennial Challenges program manager, said, “This challenge definitely raises the bar from what we are currently capable of, and we are excited to see what the maker community does with it”.
Furthermore the second phase of the competition is divided into two levels i.e., the (Level 1) Structural Member Competition and the On-Site Habitat Competition (Level 2).
The Level 1 focuses on the fabrication technologies that are needed to manufacture structural components from a combination of indigenous materials and recyclables, or indigenous materials alone.
On the other hand, the Level 2 challenges competitors to construct full-scale habitats using indigenous materials or indigenous materials combined with recyclables.
- See more at: http://perfscience.com/content/2141815-nasa-challenges-people-come-designs-mars-habitat#sthash.vtPiW4bW.dpuf

View Article Here Read More

6 Natural Solutions To Decontaminate Soil

May 2, 2015 / / 0 Comments

Marco Torres, Prevent DiseaseWith a progressively educated population becoming more aware of the inherent dangers of the conventional food supply, urban farming has become hugely popular. However, more people are also becoming aware of contaminated soil and how heavy metals pose potential risks to their food crops. As backyard gardening continues to explode in popularity, we must ask how contaminated is our soil?Many municipalities in many countries are embracing urban agri [...]

View Article Here Read More

Australia researchers create ‘world’s first’ 3D-printed jet engines

March 1, 2015 / / 0 Comments

(Reuters) - Australian researchers unveiled the world's first 3D-printed jet engine on Thursday, a manufacturing breakthrough that could lead to cheaper, lighter and more fuel-efficient jets. Engineers at Monash University and its commercial arm are...

View Article Here Read More

Virgin Galactic Opens LauncherOne Facility in Long Beach ~ Schedules March 7th Job Fair

February 13, 2015 / / 0 Comments


 


Excerpt from spacenews.com
by Jeff Foust 

Virgin Galactic announced Feb. 12 that the company is opening a new facility in Long Beach, California, devoted to development of its small satellite launch vehicle.  Virgin Galactic said that it is leasing a 13,900-square-meter building at the Long Beach Airport that it will use for the design and manufacturing of LauncherOne.

The company did not disclose the terms of the lease.  “The technical progress our team has made designing and testing LauncherOne has enabled a move into a dedicated facility to produce the rocket at quantity,” Virgin Galactic chief executive George Whitesides said in a statement announcing the new facility. 

LauncherOne work has been based to date in Mojave, California.  LauncherOne is an air-launch system for satellites weighing up to 225 kilograms. The system will use the same aircraft, WhiteKnightTwo, as the company’s SpaceShipTwo suborbital vehicle, but replaces SpaceShipTwo with a two-stage launch vehicle using engines fueled by liquid oxygen and kerosene.  At the Federal Aviation Administration Commercial Space Transportation Conference Feb. 4, William Pomerantz, vice president of special projects for Virgin Galactic, said the company has already tested engines and other “core infrastructure” of LauncherOne. 

“We are a fairly vertically-integrated team,” he said. “We really do control a lot of the production in house.”  Pomerantz said that about 60 of the 450 employees of Virgin Galactic and its wholly-owned subsidiary, The Spaceship Company, are currently dedicated to the LauncherOne program.  Virgin Galactic said it will hold a job fair at its new Long Beach facility March 7, but did not disclose how many people it plans to hire there. The Virgin Galactic website lists approximately 20 job opening related to the LauncherOne program as of Feb. 12.  When Virgin Galactic announced the LauncherOne program in 2012, it said it had signed up several companies as initial customers, including Planetary Resources, GeoOptics, Spaceflight Inc., and Skybox Imaging, since acquired by Google.  

In January, the Virgin Group announced it was investing in OneWeb, a venture that plans a constellation of nearly 650 satellites in low Earth orbit to provide broadband communications, with at least some of those satellites to be launched by LauncherOne. 

Virgin Galactic Opens LauncherOne Facility in Long Beach

by — February 12, 2015
Virgin Galactic LauncherOne
Virgin Galactic’s LauncherOne. Credit: Virgin Galactic
WASHINGTON — Virgin Galactic announced Feb. 12 that the company is opening a new facility in Long Beach, California, devoted to development of its small satellite launch vehicle.
Virgin Galactic said that it is leasing a 13,900-square-meter building at the Long Beach Airport that it will use for the design and manufacturing of LauncherOne. The company did not disclose the terms of the lease.
“The technical progress our team has made designing and testing LauncherOne has enabled a move into a dedicated facility to produce the rocket at quantity,” Virgin Galactic chief executive George Whitesides said in a statement announcing the new facility. LauncherOne work has been based to date in Mojave, California.
Advertisement
LauncherOne is an air-launch system for satellites weighing up to 225 kilograms. The system will use the same aircraft, WhiteKnightTwo, as the company’s SpaceShipTwo suborbital vehicle, but replaces SpaceShipTwo with a two-stage launch vehicle using engines fueled by liquid oxygen and kerosene.
At the Federal Aviation Administration Commercial Space Transportation Conference Feb. 4, William Pomerantz, vice president of special projects for Virgin Galactic, said the company has already tested engines and other “core infrastructure” of LauncherOne. “We are a fairly vertically-integrated team,” he said. “We really do control a lot of the production in house.”
Pomerantz said that about 60 of the 450 employees of Virgin Galactic and its wholly-owned subsidiary, The Spaceship Company, are currently dedicated to the LauncherOne program.
Virgin Galactic said it will hold a job fair at its new Long Beach facility March 7, but did not disclose how many people it plans to hire there. The Virgin Galactic website lists approximately 20 job opening related to the LauncherOne program as of Feb. 12.
When Virgin Galactic announced the LauncherOne program in 2012, it said it had signed up several companies as initial customers, including Planetary Resources, GeoOptics, Spaceflight Inc., and Skybox Imaging, since acquired by Google.
In January, the Virgin Group announced it was investing in OneWeb, a venture that plans a constellation of nearly 650 satellites in low Earth orbit to provide broadband communications, with at least some of those satellites to be launched by LauncherOne.
- See more at: http://spacenews.com/virgin-galactic-opens-launcherone-facility-in-long-beach/#sthash.sxcVmjTW.dpuf

View Article Here Read More

Yes, that 3D-printed mansion is safe to live in

February 13, 2015 / / 0 Comments


WinSun claims that their new 3D printed five-story building is the tallest of its kind in the world. Credit: 3ders.org
WinSun claims that their new 3D printed five-story building is the tallest of its kind in the world. 


Excerpt from

Back in April, a team of Chinese construction workers used a 3D printer to construct houses. By day’s end, there were 10 standing. They were compact and fairly bare bones — nothing much to look at besides the “wow!” factor of there being as many as — count them — 10. But this time around, those same builders have taken the wraps off an achievement that’s roundly more impressive.
In Suzhou Industrial Park, adjacent to Shanghai, stands a five-story structure that the WinSun Decoration Design Engineering firm claims is “the world’s tallest 3D-printed building.” Next to it is the equally massive 3D-printed mansion, which measures 11,840 square feet. Like the previous buildings, the walls are comprised of a mix of concrete and recycled waste materials, such as glass and steel, and formed layer by printed layer. The company stated that the total cost for the mansion was roughly $161,000. 
In a broader sense, this latest feat is yet another indication of how rapidly additive manufacturing techniques are advancing. Once used primarily as a means to quickly render miniature model versions of products, the technology has reached a point where large-scale printers are now capable of making life-sized working creations, such as automobiles, in mere days. For instance, it took less than 48 hours for start-up Local Motors to print a two-seater called the Strati into existence and drive it off the showroom.
Many of these designs, however, typically don’t amount to much beyond being passion projects meant to push 3D printing into new frontiers and drum up some publicity along the way. One example of this is the massive 3D Print Canal House that’s being constructed entirely on-site along a canal in Amsterdam, a process that’s slated to take longer and is less feasible than standard construction, Phil Reeves of UK-based 3D printing research firm Econolyst recently told CNN.
More promising, though, is a system developed by Behrokh Khoshnevis, a University of Southern California engineering professor. His concept machine, called Contour Crafting, involves a clever combination of mechanical cranes and 3D layering to print and assemble entire homes simultaneously — complete with insulation and indoor plumbing — in less than a day. 

Assembling 3D printed buildings is quite similar to erecting prefab homes. Credit: 3ders.org
Assembling 3D printed buildings is quite similar to erecting prefab homes. 


The approach employed by WinSun isn’t anywhere near that level of sophistication, but it may well prove to be the most practical – at least thus far. There is some labor and equipment costs that comes from trucking in and piecing together the various sections on-site, though the manner in which it all comes together is comparable to the ease of prefab assembly. It’s also reportedly greener thanks to the addition of recycled materials. 
To pitch the advantages of their technology, the company held a news conference to announce that they had taken on orders for 20,000 smaller units as well as highlight some significant cost-cutting figures. According toindustry news site 3Der:
The sheer size of the printer allows for a 10x increase in production efficiency. WinSun estimates that 3D printing technology can save between 30 and 60 percent of building materials and shortens production times by 50 to even 70 percent, while decreasing labor costs by 50 up to even 80 percent. Future applications include 3D printed bridges or tall office buildings that can be built right on site.
WinSun did not respond to a request to disclose how they arrived at those numbers, but Enrico Dini, an Italian civil engineer and chairman of competing start-up Monolite, says that he suspects the calculations may be a tad bit inflated. Still, he emphasized that his own data does back up the claim that, compared to conventional methods, layering may boost overall efficiency. 
“It would be very difficult to fabricate such large sections with traditional concrete casting,” he says. “With 3D printing, you have a lot less waste because you’re only printing out as much material as you need and you can custom shape whole sections on the spot, which can be a big challenge.”

WinSuns 3D printed villa has several rooms and has been deemed to be up to Chinas national safety standards. Credit: 3ders.org
WinSun’s 3D-printed villa has several rooms and has been deemed to be up to China’s national safety standards.

One major concern is whether these large-scale dwellings can hold up over time against the elements. According to 3Der, Ma Rongquan, chief engineer of China Construction Bureau, inspected the building’s structural integrity and found them to be up to code, but was careful to note that state officials have yet to establish specific criteria for assessing the long-term safety of 3D printed architecture.   
And as Dini, who supports the technology, points out, there is the possibility that the use of additive manufacturing may pose some degree of risk. “The only issue is that as the layers of concrete are bonded together, they’re drying at slightly different rates and that’s not very ideal,” he explains. “So there’s maybe a higher chance of it fracturing at the contact point if there’s a strong enough force at play.” 
Regardless, Dini says he’d feel completely safe going inside any floor of either building since construction materials used today are likely to contain special additives to enhance strength and resistance. One such formulation, fiber-reinforced Ductal, has been shown in some tests to be 10 times stronger and last twice as long as regular concrete. He stressed that walls should also be tested to ensure that other properties, such as acoustics, ventilation and thermal insulations are on par with existing buildings.
“In Italy, building standards are extremely strict,” he noted. “But I can’t say I can say the same about China.”

View Article Here Read More

New internet neutrality: FCC chairman proposes strong new rules

February 5, 2015 / / 0 Comments

Excerpt from mercurynews.comThe federal government's top communications regulator on Wednesday called for strong new rules to bar Internet and wireless providers from blocking, slowing or discriminating against consumers' access to particular websi...

View Article Here Read More

The Best Star Gazing Binoculars for 2015

January 24, 2015 / / 0 Comments




Excerpt from space.com

Most people have two eyes. Humans evolved to use them together (not all animals do). People form a continuous, stereoscopic panorama movie of the world within in their minds. With your two eyes tilted upward on a clear night, there's nothing standing between you and the universe. The easiest way to enhance your enjoyment of the night sky is to paint your brain with two channels of stronger starlight with a pair of binoculars. Even if you live in — or near — a large, light-polluted city, you may be surprised at how much astronomical detail you'll see through the right binoculars!
Our editors have looked at the spectrum of current binocular offerings. Thanks to computer-aided design and manufacturing, there have never been more high-quality choices at reasonable prices. Sadly, there's also a bunch of junk out there masquerading as fine stargazing instrumentation. We've selected a few that we think will work for most skywatchers.
There was a lot to consider: magnification versus mass, field of view, prism type, optical quality ("sharpness"), light transmission, age of the user (to match "exit pupil" size, which changes as we grow older), shock resistance, waterproofing and more. 

The best binoculars for you

"Small" astronomy binoculars would probably be considered "medium" for bird watching, sports observation and other terrestrial purposes. This comes about as a consequence of optics (prism type and objective size, mostly). "Large" binoculars are difficult to use for terrestrial applications and have a narrow field of view. They begin to approach telescope quality in magnification, resolution and optical characteristics.

Most of our Editors' Choicesfor stargazing binoculars here are under $300. You can pay more than 10 times that for enormous binocular telescopes used by elite enthusiasts on special mounts! You'll also pay more for ruggedized ("mil spec," or military standard) binoculars, many of which suspend their prisms on shock mounts to keep the optics in precise alignment.

Also, our Editors' Choices use Porro prism optics. Compact binoculars usually employ "roof" prisms, which can be cast more cheaply, but whose quality can vary widely. [There's much more about Porro prisms in our Buyer's Guide.]
We think your needs are best served by reviewing in three categories.
  • Small, highly portable binoculars can be hand-held for viewing ease.
  • Medium binoculars offer higher powers of magnification, but still can be hand-held, if firmly braced.
  • Large binoculars have bigger "objective" lenses but must be mounted on a tripod or counterweighted arm for stability.
Here's a detailed look at our Editor's Choice selections for stargazing binoculars:

Best Small Binoculars 

Editor's Choice: Oberwerk Mariner 8x40 (Cost: $150)

Oberwerk in German means "above work." The brand does indeed perform high-level optical work, perfect for looking at objects above, as well as on the ground or water. Founder Kevin Busarow's Mariner series is not his top of the line, but it benefits greatly from engineering developed for his pricier models. The Oberwerk 8x40’s treat your eyes to an extremely wide field, at very high contrast, with razor-sharp focus; they are superb for observing the broad starscapes of the Milky Way. Just 5.5 inches (14 cm) from front to back and 6.5 inches wide (16.5 cm), the Mariners are compact and rugged enough to be your favorite "grab and go binoculars." But at 37 ounces, they may be more than a small person wants to carry for a long time.


Runner-Up: Celestron Cometron 7x50 (Cost: $30)

Yes, you read that price correctly! These Celestron lightweight, wide-field binoculars bring honest quality at a remarkably low price point. The compromise comes in the optics, particularly the prism's glass type (you might see a little more chromatic aberration around the edges of the moon, and the exit pupil isn't a nice, round circle). Optimized for "almost infinitely distant" celestial objects, these Cometrons won't focus closer than about 30 feet (9.1 meters).  But that's fine for most sports and other outdoor use. If you're gift-buying for multiple young astronomers – or you want an inexpensive second set for yourself – these binoculars could be your answer. Just maybe remind those young folks to be a little careful around water; Celestron claims only that the Cometrons are "water resistant," not waterproof. 


Honorable Mention: Swarovski Habicht 8x30 (Cost: $1,050)

From the legendary Austrian firm of Swarovski Optik, these "bins" are perfect. Really. Very sharp. Very lightweight. Very wide field. Very versatile. And very expensive! Our editors would have picked them if we could have afforded them. 

Honorable Mention: Nikon Aculon 7x50 (Cost: $110) 

Nikon's legendary optical quality and the large, 7mm exit pupil diameter make these appropriate as a gift for younger skywatchers. 

Best Medium Binoculars

Editor's Choice: Celestron SkyMaster 8x56 (Cost: $210)

A solid, chunky-feeling set of quality prisms and lenses makes these binoculars a pleasant, 38oz. handful. A medium wide 5.8 degrees filed of view and large 7mm exit pupil brings you gently into a sweet sky of bright, though perhaps not totally brilliant, stars. Fully dressed in a rubber wetsuit, these SkyMasters are waterproof. Feel free to take them boating or birding on a moist morning. Their optical tubes were blown out with dry nitrogen at the factory, then sealed. So you can expect them not to fog up, at least not from the inside. Celestron's strap-mounting points on the Skymaster 8x56 are recessed, so they don't bother your thumbs, but that location makes them hard to fasten. 


Runner-Up: Oberwerk Ultra 15x70 (Cost: $380)

The most rugged pair we evaluated, these 15x70s are optically outstanding. Seen through the Ultra's exquisitely multi-coated glass, you may find yourself falling in love with the sky all over again. Oberwerk's method of suspending their BAK4 glass Porro prisms offers greater shock-resistance than most competitors’ designs. While more costly than some comparable binoculars, they deliver superior value. Our only complaint is with their mass: At 5.5 lbs., these guys are heavy!  You can hand-hold them for a short while, if you’re lying down. But they are best placed on a tripod, or on a counterweighted arm, unless you like shaky squiggles where your point-source stars are supposed to be. Like most truly big binoculars, the eyepieces focus independently; there’s no center focus wheel. These "binos" are for true astronomers. 


Honorable Mention: Vixen Ascot 10x50 (Cost:$165)

These quirky binoculars present you with an extremely wide field. But they are not crash-worthy – don't drop them in the dark – nor are they waterproof, and the focus knob is not conveniently located. So care is needed if you opt for these Vixen optics. 

Best Large Binoculars

Don't even think about hand-holding this 156-ounce beast! The SkyMaster 25x100 is really a pair of side-by-side 100mm short-tube refractor telescopes. Factor the cost of a sturdy tripod into your purchase decision, if you want to go this big.  The monster Celestron comes with a sturdy support spar for mounting. Its properly multi-coated optics will haul in surprising detail from the sky.  Just make sure your skies are dark; with this much magnification, light pollution can render your images dingy. As with many in the giant and super-giant class of binoculars, the oculars (non-removable eyepieces) focus separately, each rotating through an unusually long 450 degrees.  Getting to critical focus can be challenging, but the view is worth it. You can resolve a bit of detail on face of the new moon (lit by "Earthshine") and pick out cloud bands on Jupiter; tha's pretty astonishing for binoculars. 


Runner-Up: Orion Astronomy 20x80 (Cost: $150)

These big Orions distinguish themselves by price point; they're an excellent value. You could pay 10 times more for the comparably sized Steiners Military Observer 20x80 binoculars! Yes, the Orions are more delicate, a bit less bright and not quite as sharp. But they do offer amazingly high contrast; you'll catch significant detail in galaxies, comets and other "fuzzies." Unusually among such big rigs, the Astronomy 20x80 uses a center focus ring and one "diopter" (rather than independently focusing oculars); if you’re graduating from smaller binoculars, which commonly use that approach, this may be a comfort. These binoculars are almost lightweight enough to hold them by hand. But don't do that, at least not for long periods. And don't drop them. They will go out of alignment if handled roughly. 


Honorable Mention: Barska Cosmos 25x100 (Cost: $230)

They are not pretty, but you're in the dark, right? Built around a tripod-mountable truss tube, these Barskas equilibrate to temperature quickly and give you decent viewing at rational cost. They make for a cheaper version of our Editors' Choice Celestron SkyMasters. 

Honorable Mention: Steiner Observer 20x80 (Cost: $1,500)

Not at all a practical cost choice for a beginning stargazer, but you can dream, can't you? These Steiner binoculars are essentially military optics "plowshared" for peaceful celestial observing. 

Why we chose NOT to review certain types

Image stabilized?

Binoculars with active internal image stabilization are a growing breed. Most use battery-powered gyroscope/accelerometer-driven dynamic optical elements. We have left this type out of our evaluation because they are highly specialized and pricey ($1,250 and up). But if you are considering active stabilization, you can apply the same judgment methods detailed in our Buyer's Guide.

Comes with a camera?

A few binoculars are sold with built-in cameras. That seems like a good idea. But it isn't, at least not for skywatching. Other than Earth's moon, objects in the night sky are stingy with their photons. It takes a lengthy, rock-steady time exposure to collect enough light for a respectable image. By all means, consider these binocular-camera combos for snapping Facebook shots of little Jenny on the soccer field. But stay away from them for astronomy.

Mega monster-sized?

Take your new binoculars out under the night sky on clear nights, and you will fall in love with the universe. You will crave more ancient light from those distant suns. That may translate into a strong desire for bigger stereo-light buckets.

Caution: The next level up is a quantum jump of at least one financial order of magnitude. But if you have the disposable income and frequent access to dark skies, you may want to go REALLY big. Binocular telescopes in this class can feature interchangeable matching eyepieces, individually focusing oculars, more than 30x magnification and sturdy special-purpose tripods. Amateurs using these elite-level stereoscopes have discovered several prominent comets.

Enjoy your universe

If you are new to lens-assisted stargazing, you'll find excellent enhanced views among the binocular choices above. To get in deeper and to understand how we picked the ones we did, jump to our Buyer's Guide: How to Choose Binoculars for Sky Watching.

You have just taken the first step to lighting up your brain with star fire. May the photons be with you. Always. 

Skywatching Events 2015

Once you have your new binoculars, it's time to take them for a spin. This year intrepid stargazers will have plenty of good opportunities to use new gear.

On March 20, for example, the sun will go through a total solar eclipse. You can check out the celestial sight using the right sun-blocking filters for binoculars, but NEVER look at the sun directly, even during a solar eclipse. It's important to find the proper filters in order to observe the rare cosmic show. 

Observers can also take a look at the craggy face of the moon during a lunar eclipse on April 4. Stargazers using binoculars should be able to pick out some details not usually seen by the naked eye when looking at Earth's natural satellite.

Skywatchers should also peek out from behind the binoculars for a chance to see a series of annual meteor showers throughout the year.

View Article Here Read More

Liftoff! SpaceX Gets $1 Billion From Google and Fidelity

January 20, 2015 / / 0 Comments

 Excerpt from  nbcnews.com SpaceX, the California-based rocket company that now has its sights set on a globe-spanning satellite constellation, says it has received a $1 billion investment from Google and Fidelity that values the c...

View Article Here Read More

NASA Fuel Shortage: Will Plutonium Scarcity End Deep-Space Exploration By 2020?

January 7, 2015 / / 0 Comments

 Excerpt from isciencetimes.com By Philip Ross A plutonium pellet, the fuel that keeps NASA space exploration going. (Photo: Creative Commons)  NAS...

View Article Here Read More

Welcoming the Era of In-Space Manufacturing

November 25, 2014 / / 0 Comments


Mike Snyder (right) and Jason Dunn of Made In Space get the company's 3D printer ready for its September 2014 launch toward the International Space Station. The machine printed its first part in orbit on Nov. 24, 2014.
Mike Snyder (right) and Jason Dunn of Made In Space get the company's 3D printer ready for its September 2014 launch toward the International Space Station. The machine pri

Excerpt from space.com

 Mike Snyder, lead engineer for the company Made In Space, which designed and built the 3D printer currently aboard the International Space Station, contributed this article to Space.com's Expert Voices: Op-Ed & Insights.

Human spaceflight reached an important milestone this week. An additive manufacturing device or 3D printer, was turned on, and initiated the first official 3D print on the International Space Station (ISS). 

The print took slightly more than an hour, and once it finished, the world changed. At the Made In Space Operations Center in Moffett Field, California, the rest of the team and I had the ability to command the printer and see inside it as the machine received and executed our commands. For the first time, humans demonstrated the ability to manufacture while in space. At this moment, if the space station absolutely needs a part that the 3D printer can build, I can start producing the part onboard the ISS within minutes — from my chair in California. 


The ability to deliver components on demand without the need of a launch vehicle can redefine how space-mission strategies work. Before last week, every object that humans have ever put in space was launched there and not made in space. Of course, many experiments and efforts have been able to form items such as crystalline structures and latex spheres, as well as assembly-type construction. 3D printing is completely different. This capability does more than just build predetermined articles that were designed months or years before launch. The 3D printer can build files that are created after launch and sent to orbit when needed.

View Article Here Read More
Older posts

Deep Space Leaderboard 728x90

Creative Commons License
This work is licensed under a
Creative Commons Attribution 4.0
International License.
unless otherwise marked.

Terms of Use | Privacy Policy



— Up ↑ —