Tag: count (page 1 of 9)

The Case of the Incredible Disappearing Cancer Patients

Tracy Kolenchuk, ContributorIt’s been almost 20 years since I met my first disappearing patient — a nurse in her early 40s, let’s call her Kate. Kate was diagnosed with breast cancer. As a nurse, she had seen the results of breast cancer treatments. She was terrified, and determined. She was not heading for surgery, nor chemotherapy, nor radiation.But Kate worked in a hospital. She worked with the doctors who diagnosed her cancer, and she worked with [...]

View Article Here Read More

The Class-Domination Theory of Power

by G. William DomhoffNOTE: WhoRulesAmerica.net is largely based on my book,Who Rules America?, first published in 1967 and now in its7th edition. This on-line document is presented as a summary of some of the main ideas in that book.Who has predominant power in the United States? The short answer, from 1776 to the present, is: Those who have the money -- or more specifically, who own income-producing land and businesses -- have the power. George Washington was one of the biggest landowner [...]

View Article Here Read More

What astronomers learned when Messenger space probe crashed into Mercury



Excerpt from statecolumn.com


On April 30, NASA concluded an historic voyage known as the Mercury Surface, Space Environment, Geochemistry and Ranging mission. The mission came to an end when the spacecraft carrying analytical instruments, Messenger, crashed into the planet’s surface after consuming all of its fuel.
The mission was far from a waste, however, as NASA rarely expects to see the majority of the spacecraft they launch ever again. According to Discovery, The probe sent back a spectacular photo of the surface of Mercury, using the craft’s Narrow Angle Camera in tandem with the Mercury Dual Imaging System. The photo shows a mile-wide view of the nearby planet’s surface in 2.1 meters per pixel resolution.
Right after the probe delivered the photo to NASA’s Deep Space Network, which is a collection of global radio antennae that tracks data on the agency’s robotic missions around the solar system, the signal was lost in what scientists assume was the craft’s final contact with the closest planet to the sun.
The four-year mission came to an end when the craft could no longer maintain its orbit around the solar system’s innermost planet due to lack of fuel. Mercury is just 36 miles from the sun, compared to Earth, which is 93 million miles away from the center of the solar system. Mercury is a peculiar world, with both frigid and extremely hot temperatures. Messenger also revealed that Mercury has a magnetic field similar to that of Earth’s, created by the motion of metallic fluids within the planet’s core.
The main challenge the Messenger mission faced was getting the space probe into orbit around Mercury. Due to the planet’s proximity to the sun, it was extremely difficult for flight engineers to avoid its gravitational pull. In addition to the challenge of catching Mercury’s comparatively weak gravitational force, high temperatures also made things tricky. Messenger was equipped with a sunshield designed to protect the spaceship cool on the side that faced the sun. NASA engineers also attempted to chart a long, elliptical orbit around Mercury, giving Messenger time to cool off as it rounded the backside of the planet.
Messenger made over 4,000 orbits around Mercury between 2011 and 2015, many more than the originally planned one-year mission would allow.
With the close-up shots of Mercury’s surface provided by Messenger, NASA scientists were able to detect trace signals of magnetic activity in Mercury’s crust. Using clues from the number of impact craters on the surface, scientists figured that Mercury’s magnetized regions could be as old as 3.7 billion years. Astronomers count the craters on a planet in order to estimate its age – the logic being that younger surfaces should have fewer impact sites than older surfaces.
The data sent back by Messenger has caused astronomers to reconsider their understanding of Mercury’s magnetic history. They now date the beginning of magnetism on Mercury to about 700 million years after the planet was formed. They cannot say for sure, however, if the magnetic field has been consistently active over this timeframe.
According to Messenger guest investigator Catherine Johnson, geophysicist at the University of British Columbia in Vancouver, that it was possible the magnetic field has been active under constant conditions, though she suspects it might also oscillate over time, like Earth’s. Information for the time period between 4 billion years ago and present day is sparse, though Johnson added that additional research is in the pipeline.
Johnson was pleased, however, with the insight offered into Mercury’s formation provided by these new magnetic clues. Magnetism on a planetary scale typically indicates a liquid metal interior. Since Mercury is so tiny, scientists originally believed that its center would be solid, due to the rate of cooling. The presence of liquid in the planet’s center suggests other materials’ presence, which would lower the freezing point. This suggests that a totally solid core would be unlikely.
Mercury’s magnetic field offers valuable insight into the formation of the planet, the solar system, and even the universe. Magnetism on Mercury indicates that it has a liquid iron core, according to Messenger lead scientist Sean Solomon of Columbia University.

View Article Here Read More

NASA application grants general public the opportunity to explore the surface of Vesta

NASA's Dawn spacecraft visited Vesta for a year before continuing on to Ceres (Image: NASA/JPL-Caltech) Excerpt from gizmag.comNASA has released a browser-based application that allows citizen scientists to explore the surface of the asteroid V...

View Article Here Read More

MAVEN mission finds early surprises in Martian atmosphere

Excerpt from chroniclebulletin.com University of Colorado-led Mars mission has observed two unexpected phenomena in the Martian atmosphere, unveiled Wednesday at the 46th Lunar and Planetary Science Conference in Texas.NASA describes the finds by MA...

View Article Here Read More

Exoplanet Bonanza Boosts Count by 1,200

Excerpt from news.discovery.comDozens of candidate worlds reside within the "habitable zones" of their parent stars. THE GIST - NASA's Kepler telescope has found more than 1,200 extrasolar planet candidates. - Smaller worlds, like Earth,...

View Article Here Read More

Yes, that 3D-printed mansion is safe to live in


WinSun claims that their new 3D printed five-story building is the tallest of its kind in the world. Credit: 3ders.org
WinSun claims that their new 3D printed five-story building is the tallest of its kind in the world. 


Excerpt from

Back in April, a team of Chinese construction workers used a 3D printer to construct houses. By day’s end, there were 10 standing. They were compact and fairly bare bones — nothing much to look at besides the “wow!” factor of there being as many as — count them — 10. But this time around, those same builders have taken the wraps off an achievement that’s roundly more impressive.
In Suzhou Industrial Park, adjacent to Shanghai, stands a five-story structure that the WinSun Decoration Design Engineering firm claims is “the world’s tallest 3D-printed building.” Next to it is the equally massive 3D-printed mansion, which measures 11,840 square feet. Like the previous buildings, the walls are comprised of a mix of concrete and recycled waste materials, such as glass and steel, and formed layer by printed layer. The company stated that the total cost for the mansion was roughly $161,000. 
In a broader sense, this latest feat is yet another indication of how rapidly additive manufacturing techniques are advancing. Once used primarily as a means to quickly render miniature model versions of products, the technology has reached a point where large-scale printers are now capable of making life-sized working creations, such as automobiles, in mere days. For instance, it took less than 48 hours for start-up Local Motors to print a two-seater called the Strati into existence and drive it off the showroom.
Many of these designs, however, typically don’t amount to much beyond being passion projects meant to push 3D printing into new frontiers and drum up some publicity along the way. One example of this is the massive 3D Print Canal House that’s being constructed entirely on-site along a canal in Amsterdam, a process that’s slated to take longer and is less feasible than standard construction, Phil Reeves of UK-based 3D printing research firm Econolyst recently told CNN.
More promising, though, is a system developed by Behrokh Khoshnevis, a University of Southern California engineering professor. His concept machine, called Contour Crafting, involves a clever combination of mechanical cranes and 3D layering to print and assemble entire homes simultaneously — complete with insulation and indoor plumbing — in less than a day. 

Assembling 3D printed buildings is quite similar to erecting prefab homes. Credit: 3ders.org
Assembling 3D printed buildings is quite similar to erecting prefab homes. 


The approach employed by WinSun isn’t anywhere near that level of sophistication, but it may well prove to be the most practical – at least thus far. There is some labor and equipment costs that comes from trucking in and piecing together the various sections on-site, though the manner in which it all comes together is comparable to the ease of prefab assembly. It’s also reportedly greener thanks to the addition of recycled materials. 
To pitch the advantages of their technology, the company held a news conference to announce that they had taken on orders for 20,000 smaller units as well as highlight some significant cost-cutting figures. According toindustry news site 3Der:
The sheer size of the printer allows for a 10x increase in production efficiency. WinSun estimates that 3D printing technology can save between 30 and 60 percent of building materials and shortens production times by 50 to even 70 percent, while decreasing labor costs by 50 up to even 80 percent. Future applications include 3D printed bridges or tall office buildings that can be built right on site.
WinSun did not respond to a request to disclose how they arrived at those numbers, but Enrico Dini, an Italian civil engineer and chairman of competing start-up Monolite, says that he suspects the calculations may be a tad bit inflated. Still, he emphasized that his own data does back up the claim that, compared to conventional methods, layering may boost overall efficiency. 
“It would be very difficult to fabricate such large sections with traditional concrete casting,” he says. “With 3D printing, you have a lot less waste because you’re only printing out as much material as you need and you can custom shape whole sections on the spot, which can be a big challenge.”

WinSuns 3D printed villa has several rooms and has been deemed to be up to Chinas national safety standards. Credit: 3ders.org
WinSun’s 3D-printed villa has several rooms and has been deemed to be up to China’s national safety standards.

One major concern is whether these large-scale dwellings can hold up over time against the elements. According to 3Der, Ma Rongquan, chief engineer of China Construction Bureau, inspected the building’s structural integrity and found them to be up to code, but was careful to note that state officials have yet to establish specific criteria for assessing the long-term safety of 3D printed architecture.   
And as Dini, who supports the technology, points out, there is the possibility that the use of additive manufacturing may pose some degree of risk. “The only issue is that as the layers of concrete are bonded together, they’re drying at slightly different rates and that’s not very ideal,” he explains. “So there’s maybe a higher chance of it fracturing at the contact point if there’s a strong enough force at play.” 
Regardless, Dini says he’d feel completely safe going inside any floor of either building since construction materials used today are likely to contain special additives to enhance strength and resistance. One such formulation, fiber-reinforced Ductal, has been shown in some tests to be 10 times stronger and last twice as long as regular concrete. He stressed that walls should also be tested to ensure that other properties, such as acoustics, ventilation and thermal insulations are on par with existing buildings.
“In Italy, building standards are extremely strict,” he noted. “But I can’t say I can say the same about China.”

View Article Here Read More

Study Suggests Baby Chicks Can Count! ~ Video





Excerpt from nbcnews.com
By Tia Ghose, LiveScience



It's not just humans who can count: Newly published research suggests chicks seem to have a number sense, too. 

Scientists found that chicks seem to count upward, moving from left to right. They put smaller numbers on the left, and larger numbers on the right — the same mental representation of the number line that humans use. 

"Our results suggest a rethinking of the relationship between numerical abilities and verbal language, providing further evidence that language and culture are not necessary for the development of a mathematical cognition," said study lead author Rosa Rugani, a psychologist at the University of Padova in Italy.

The left-to-right way of thinking about ascending numbers seems to be embedded in people's mental representations of numbers, but it's not clear exactly why. Is it an artifact of some long-lost accident of history, or is it a fundamental aspect of the way the brain processes numbers? 

To help answer those questions, Rugani and her colleagues trained 3-day-old chicks to travel around a screen panel with five dots on it to get to a food treat behind it. This made the five-dot panel an anchor number that the chicks could use for comparison with other numbers. 

After the chicks learned that the five-dot panel meant food, the researchers removed that panel and then placed the chicks in front of two panels, one to the left and the other to the right, that each had two dots. The chicks tended to go to the left panel, suggesting that they mentally represent numbers smaller than five as being to the left of five. 

When the researchers put the chicks in front of two panels that each had eight dots, the chicks walked to the panel on the right. This suggests the chicks mentally represent numbers larger than five as being to the right of five, the researchers said. 

In a second experiment, the researchers repeated the whole process, but started with a panel that had 20 dots instead of five. They then added two other panels that had either eight or 32 dots. Sure enough, the baby chicks tended to go to the left when the screens had just eight dots, and to the right when they had 32 dots, according to the findings published in this week's issue of the journal Science. 

"I would not at all be surprised that the number spatial mapping is also found in other animals, and in newborn infants," Rugani said.



Click to zoom

View Article Here Read More

The Best Bet for Alien Life May Be in Planetary Systems Very Different From Ours




Excerpt from wired.com


In the hunt for extraterrestrial life, scientists started by searching for a world orbiting a star just like the sun. After all, the steady warmth of that glowing yellow ball in the sky makes life on Earth possible.

But as astronomers continue to discover thousands of planets, they’re realizing that if (or when) we find signs of extraterrestrial life, chances are good that those aliens will orbit a star quite different from the sun—one that’s redder, cooler, and at a fraction of the sun’s size and mass. So in the quest for otherworldly life, many astronomers have set their sights on these small stars, known as red dwarfs or M dwarfs.

At first, planet-hunting astronomers didn’t care so much about M dwarfs. After the first planet outside the solar system was discovered in 1995, scientists began hunting for a true Earth twin: a rocky planet like Earth with an orbit like ours around a sun-like star. Indeed, the search for that kind of system drove astronomers through most of the 2000s, says astronomer Phil Muirhead of Boston University.

But then astronomers realized that it might be technically easier to find planets around M dwarfs. Detecting another planet is really hard, and scientists rely on two main methods. In the first, they look for a drop in a star’s brightness when a planet passes in front of it. In the second, astronomers measure the slight wobble of a star, caused by the gentle gravitational tug of an orbiting planet. With both of these techniques, the signal is stronger and easier to detect for a planet orbiting an M dwarf. A planet around an M dwarf also orbits more frequently, increasing the chances that astronomers will spot it.

M dwarfs got a big boost from the Kepler space telescope, which launched in 2008. By staring at small patch of the sky, the telescope searches for suddenly dimming stars when a planet passes in front of them. In doing so, the spacecraft discovered a glut of planets—more than 1,000 at the latest count—it found a lot of planets around M dwarfs. “Kepler changed everything,” Muirhead said. Because M-dwarf systems are easier to find, the bounty of such planets is at least partly due to a selection effect. But, as Muirhead points out, Kepler is also designed to find Earth-sized planets around sun-like stars, and the numbers so far suggest that M-dwarfs may offer the best odds for finding life.

“By sheer luck you would be more likely to find a potentially habitable planet around an M dwarf than a star like the sun,” said astronomer Courtney Dressing of Harvard. She led an analysis to estimate how many Earth-sized planets—which she defined as those with radii ranging from one to one-and-a-half times Earth’s radius—orbit M dwarfs in the habitable zone, the region around the star where liquid water can exist on the planet’s surface. According to her latest calculations, one in four M dwarfs hosts such a planet.

That’s higher than the estimated number of Earth-sized planets around a sun-like star, she says. For example, an analysis by astronomer Erik Petigura of UC Berkeley suggests that fewer than 10 percent of sun-like stars have a planet with a radius between one and two times that of Earth’s.

This illustration shows Kepler-186f, the first rocky planet found in a star's habitable zone. Its star is an M dwarf.
This illustration shows Kepler-186f, the first rocky planet found in a star’s habitable zone. Its star is an M dwarf. NASA Ames/SETI Institute/JPL-Caltech


M dwarfs have another thing going for them. They’re the most common star in the galaxy, comprising an estimated 75 percent of the Milky Way’s hundreds of billions of stars. If Dressing’s estimates are right, then our galaxy could be teeming with 100 billion Earth-sized planets in their stars’ habitable zones.

To be sure, these estimates have lots of limitations. They depend on what you mean by the habitable zone, which isn’t well defined. Generally, the habitable zone is where it’s not too hot or too cold for liquid water to exist. But there are countless considerations, such as how well a planet’s atmosphere can retain water. With a more generous definition that widens the habitable zone, Petigura’s numbers for Earth-sized planets around a sun-like star go up to 22 percent or more. Likewise, Dressing’s numbers could also go up.
Astronomers were initially skeptical of M-dwarf systems because they thought a planet couldn’t be habitable near this kind of star. For one, M dwarfs are more active, especially during within the first billion years of its life. They may bombard a planet with life-killing ultraviolet radiation. They can spew powerful stellar flares that would strip a planet of its atmosphere.

And because a planet will tend to orbit close to an M dwarf, the star’s gravity can alter the planet’s rotation around its axis. When such a planet is tidally locked, as such a scenario is called, part of the planet may see eternal daylight while another part sees eternal night. The bright side would be fried while the dark side would freeze—hardly a hospitable situation for life.

But none of these are settled issues, and some studies suggest they may not be as big of a problem as previously thought, says astronomer Aomawa Shields of UCLA. For example, habitability may depend on specific types and frequency of flares, which aren’t well understood yet. Computer models have also shown that an atmosphere can help distribute heat, preventing the dark side of a planet from freezing over.

View Article Here Read More

Kepler Space Telescope Finds More Earth-like Planets ~ Learn how to join the search


 


Excerpt from
waaytv.com

NASA's Kepler Space Telescope has been hunting the cosmos for exoplanets since March of 2009.  In its nearly five years of searching the stars, it has found thousands of possible candidates.  Scientists recently verified the thousandth planet Kepler had found, and even more exciting, they announced that Kepler had found three more Earth-like planets.
Those three planets bring Kepler's Earth-like planet count to a total of eight.  In order to qualify as "Earth-like," these exoplanets must be less than twice the size of the Earth and orbit their own sun within the habitable zone.  This "Goldilocks zone" is a belt in solar systems where it's neither too hot nor too cold for liquid water to exist.

"Each result from the planet-hunting Kepler mission's treasure trove of data takes us another step closer to answering the question of whether we are alone in the Universe," said John Grunsfeld, associate administrator of NASA’s Science Mission Directorate at the agency’s headquarters in Washington. “The Kepler team and its science community continue to produce impressive results with the data from this venerable explorer."

The Kepler team has also found super-Earths and gas giants like Jupiter around other stars.  NASA artists compiled retro-style travel posters from three discovered planets.
Kepler finds planets by watching distant stars for fluctuation in light.  If the light hitting the telescope drops dramatically and then returns to normal levels, chances are a planet came in between the star and Kepler.  Scientists can analyze the data and light filtered by the candidate planet's atmosphere to make guesses at the size, mass and composition.

"With each new discovery of these small, possibly rocky worlds, our confidence strengthens in the determination of the true frequency of planets like Earth," said co-author Doug Caldwell, SETI Institute Kepler scientist at NASA's Ames Research Center at Moffett Field, California. "The day is on the horizon when we’ll know how common temperate, rocky planets like Earth are.”

The space telescope actually has two crippled stabilizing gyros.  But instead of giving up on the mission, engineers are using pressure from photons emitted by the sun to stabilize the telescope.  The first space telescope looking for alien worlds is literally balancing on a sunbeam to continue its mission, and that's not science fiction, that's science fact.

Citizen scientists can also participate in the mission.  The website PlanetHunters.org contains catalogs of data from K1, the original Kepler mission, and K2, the extended mission making use of the sun to balance the telescope.  The K2 data has been sorted through, but Planet Hunters still needs help sifting through the K1 data.
The website's instructions read:

"As the planet passes in front of (or transits) a star, it blocks out a small amount of the star’s light, making the star appear a little bit dimmer. You’re looking for points on the light curve that appear lower than the rest. When you spot a potential transit, mark each one on the light curve."

View Article Here Read More

How to Watch Tonight’s Explosive Geminids Meteor Shower


How to Watch This Week's Big Ass Perseid Meteor Shower


pcmag.com


Thank you, tiny space rocks. Because of you, the entire population of planet Earth will be treated to one of 2014's most spectacular celestial displays. The Geminids meteor shower is the most active of the annual meteor showers—by a long shot—and it's just about to peak.

Tonight, the shower might produce as many as 120 meteors per hour (though back in 2011, the Geminids hit a peak rate of 198 meteors per hour). Compare this count to the second most abundant shower, the Perseids, which take place in late August and top out at around 60 meteors per hour.

Fireball
The annual December display is largely due to asteroid 3200 Phaethon, a three-mile wide chunk of rock that crosses the paths of all the inner rocky planets and travels closer to the sun than any other named asteroid. As ol' 3200 heats up close to the sun during its 1.5-year orbit, it expels materials and forms a trail much like a comet (indeed, it is sometimes referred to as a "rock comet"). But that's not the full story. Recent observations have shown that 3200 mostly expels dust as it is baked by the sun. And while this periodic "dusting" does help replenish the debris field, it's not enough material to account for all the Geminids' activity.

View Article Here Read More

Volunteers Sought for Christmas Bird Count





Excerpt from
yourdailyjournal.com 


ROCKINGHAM — The National Audubon Society is inviting Richmond County birdwatchers to participate in the longest-running citizen science survey in the world, the annual Audubon Christmas Bird Count.

Beginning Sunday, hundreds of birders and nature enthusiasts across North Carolina will take part in this long-standing tradition where data collected has helped to shape influential conservation efforts nationwide.

As North Carolina’s landscape continues to evolve with changes... the data collected during the annual Christmas Bird Count is crucial to understanding the health of native and migrating bird populations throughout North Carolina. During the 2013 CBC, five snowy owls were spotted from Asheville to Wilmington, and local citizen scientists were on hand to detail the rare event.

North Carolina’s birding circles are some of the top performing in the country, and last year, a record 51 counts across the state reported 1,113,012 individual birds from 225 species.

“In a state where inspiring conservation action is vital to the health of birds facing the damaging effects of climate change, Audubon North Carolina is excited to be a leader in statewide conservation efforts,” Executive Director Heather Hahn said in a release. “As climate change continues to affect populations of the brown-headed nuthatch, American oystercatcher, wood thrush and many more iconic species, the data collected during this annual event becomes even more important to ongoing efforts to protect our birds.”

Each year, the Audubon Christmas Bird Count mobilizes more than 70,000 volunteer bird counters in more than 2,400 locations across the Western Hemisphere. The Audubon Christmas Bird Count utilizes the power of volunteers to track the health of bird populations at a scale that professional scientists could never accomplish alone. Data compiled across North Carolina will record every individual bird and bird species seen in a specified area, contributing to a vast citizen science network that continues a tradition stretching back more than 100 years.

Birders of all ages are welcome to contribute to this fun winter tradition and nationwide citizen science project, which provides ornithologists with a crucial snapshot of native bird populations during the winter months. Each individual count is performed in a count circle with a diameter of 15 miles.

At least 10 volunteers, including a compiler to coordinate the process, count in each circle. The volunteers break up into small parties and follow assigned routes, which change little from year to year, counting every bird they see. In most count circles, some people also watch feeders instead of following routes.

View Article Here Read More

NASA Brings Scientists & Theologians Together To Prepare World For Extraterrestrial Contact

Arjun Walia, Collective-EvolutionA couple of months ago top U.S. astronomers gathered in front of congress to let them know that extraterrestrial life exists without question. Their main argument was the size of the universe, emphasizing that there are trillions of stars out there, with one in every five most likely harboring an Earth-like planet. It’s also important to keep in mind that planets do not have to be “Earth-like” in order to harbor life. You can read mor [...]

View Article Here Read More
Older posts

Creative Commons License
This work is licensed under a
Creative Commons Attribution 4.0
International License
.
unless otherwise marked.

Terms of Use | Privacy Policy



Up ↑