Age of Aquarius meditation was very successful and we have reached the critical mass, albeit barely. Around 150,000 people were actively participating:https://www.youtube.com/watch?v=33Yb3_60gwE&feature=youtu.beThis was just enough to push us over ...
Tag: construct (page 1 of 3)
Excerpt from perfscience.com
The space agency NASA has asked public to submit designs for a Mars habitat. NASA, along with the National Additive Manufacturing Innovation Institute, is holding a competition to design and build a 3-D printed habitat for deep space explorations like journey to Mars. The multi-phase 3-D Printed Habitat Challenge has been specifically designed to advance the additive construction technology that is needed to develop sustainable housing solutions for earth and beyond. As per experts, shelter is among most basic and crucial requirement for humans but carrying bulks of material to build up a habitat during a deep space mission would unnecessarily take the place in cargo that could be used for something important. The first phase of the competition that was announced on Saturday will run through September 27. This phase calls on participants to develop state-of-the-art architectural concepts that take advantage of the unique capabilities 3-D printing offers. The top 30 submissions will be considered and judged. Also winners will be awarded with prize money of $50,000 at the 2015 World Maker Faire in New York. Sam Ortega, Centennial Challenges program manager, said, “This challenge definitely raises the bar from what we are currently capable of, and we are excited to see what the maker community does with it”...
The space agency NASA has asked public to submit designs for a Mars habitat. NASA, along with the National Additive Manufacturing Innovation Institute, is holding a competition to design and build a 3-D printed habitat for deep space explorations like journey to Mars.
The multi-phase 3-D Printed Habitat Challenge has been specifically designed to advance the additive construction technology that is needed to develop sustainable housing solutions for earth and beyond.
As per experts, shelter is among most basic and crucial requirement for humans but carrying bulks of material to build up a habitat during a deep space mission would unnecessarily take the place in cargo that could be used for something important.
The first phase of the competition that was announced on Saturday will run through September 27. This phase calls on participants to develop state-of-the-art architectural concepts that take advantage of the unique capabilities 3-D printing offers.
The top 30 submissions will be considered and judged. Also winners will be awarded with prize money of $50,000 at the 2015 World Maker Faire in New York.
Sam Ortega, Centennial Challenges program manager, said, “This challenge definitely raises the bar from what we are currently capable of, and we are excited to see what the maker community does with it”.
Furthermore the second phase of the competition is divided into two levels i.e., the (Level 1) Structural Member Competition and the On-Site Habitat Competition (Level 2).
The Level 1 focuses on the fabrication technologies that are needed to manufacture structural components from a combination of indigenous materials and recyclables, or indigenous materials alone.
On the other hand, the Level 2 challenges competitors to construct full-scale habitats using indigenous materials or indigenous materials combined with recyclables.
- See more at: http://perfscience.com/content/2141815-nasa-challenges-people-come-designs-mars-habitat#sthash.vtPiW4bW.dpuf
The multi-phase 3-D Printed Habitat Challenge has been specifically designed to advance the additive construction technology that is needed to develop sustainable housing solutions for earth and beyond.
As per experts, shelter is among most basic and crucial requirement for humans but carrying bulks of material to build up a habitat during a deep space mission would unnecessarily take the place in cargo that could be used for something important.
The top 30 submissions will be considered and judged. Also winners will be awarded with prize money of $50,000 at the 2015 World Maker Faire in New York.
Sam Ortega, Centennial Challenges program manager, said, “This challenge definitely raises the bar from what we are currently capable of, and we are excited to see what the maker community does with it”.
Furthermore the second phase of the competition is divided into two levels i.e., the (Level 1) Structural Member Competition and the On-Site Habitat Competition (Level 2).
The Level 1 focuses on the fabrication technologies that are needed to manufacture structural components from a combination of indigenous materials and recyclables, or indigenous materials alone.
On the other hand, the Level 2 challenges competitors to construct full-scale habitats using indigenous materials or indigenous materials combined with recyclables.
- See more at: http://perfscience.com/content/2141815-nasa-challenges-people-come-designs-mars-habitat#sthash.vtPiW4bW.dpuf
Dr. Rita Louise, GuestWhy Did Our Ancestors Inter This Ancient Massive Architectural Wonder?Located at the highest point of the Germus range in the southeastern Anatolia region of Turkey is the mysterious site of Göbekli Tepe. Excavations at Göbekli Tepe commenced in 1995 after German archaeologist Klaus Schmidt realized what was thought to be a Byzantine cemetery was actually a prehistoric site. Schmidt quickly unearthed a number of T-shaped pillars, which set th [...]
Excerpt from io9.com Getting ready to upload your consciousness into a brain-emulating computer in a decade or two? You'll be waiting a lot longer than that. Princeton computer science researcher Timothy B. Lee doesn't think we'll ever upload our ...
Excerpt from huffingtonpost.comIntroductionWhy is it so hard to find ET? After 50 years of searching, the SETI project has so far found nothing. In the latest development, on April 14, 2015 Penn State researchers announced that after searching through...
Excerpt from huffingtonpost.comIntroduction 65 years ago, in 1950, while having lunch with colleagues Edward Teller and Herbert York, Nobel physicist Enrico Fermi suddenly blurted out, "Where is everybody?" His question is now known as Fermi's p...
“Space is just the construct that gives the illusion that there are separate objects” – Dr. Quantum (see video below)There is a phenomenon so strange, so fascinating, and so counter to what we believe to be the known scientific laws of the universe, that Einstein himself could not wrap his head around it. It’s called “quantum entanglement,” though Einstein referred to it as “spooky action at a distance.”An [...]
 |
| Japanese scientists say they have successfully transmitted energy wirelessly in a breakthrough for future solar space power systems. While the distance was relatively small, the technology could someday pave the way for mankind to tap the vast amount of solar energy available in space and use it here on Earth |
- Excerpt from dailymail.co.uk
- By Ellie Zolfagharifard
- Microwaves delivered 1.8 kw of power - enough to run an electric kettle
- Power was sent through the air with to a receiver 170ft (55 metres) away
- Technology may someday help tap vast solar energy available in space
- Jaxa's plan is to eventually have sunlight-gathering panels and antennae set up about 22,300 miles (36,000km) from the Earth
Japanese scientists have successfully transmitted energy wirelessly in a breakthrough that could pave the way for space-based solar power systems.
Mitsubishi researchers used microwaves to deliver 1.8 kilowatts of power - enough to run an electric kettle - through the air with pinpoint accuracy to a receiver 170ft (55 metres) away.
While the distance was relatively small, the technology could someday pave the way for mankind to tap the vast amount of solar energy available in space and use it here on Earth.
'This was the first time anyone has managed to send a high output of nearly two kilowatts of electric power via microwaves to a small target, using a delicate directivity control device,' said a spokesman for the Japan Aerospace Exploration Agency (Jaxa) said.
The test, which took place at Kobe Shipyard & Machinery Works in Nagoya, Japan, will help Jaxa devise its long-awaited space solar power system.
Solar power generation in space has many advantages over its Earth-based cousin, notably the permanent availability of energy, regardless of weather or time of day.
While man-made satellites, such as the International Space Station, have long since been able to use the solar energy that washes over them from the sun, getting that power down to Earth where people can use it has been the thing of science fiction.
The test, which took place at Kobe Shipyard & Machinery Works in Nagoya, Japan, will help Jaxa devise its long-awaited space solar power system. Mitsubishi used microwaves to deliver 1.8 kilowatts of power - enough to run an electric kettle - through the air with pinpoint accuracy to a receiver (right) 170ft (55 metres) away
In a separate project, a Japanese firm last year revealed plans to cover the moon in a huge swathe of solar panels and use them to power homes here on Earth
But the Japanese research offers the possibility that humans will one day be able to farm an inexhaustible source of energy in space.
The idea, said the Jaxa spokesman, would be for microwave-transmitting solar satellites - which would have sunlight-gathering panels and antennae - to be set up about 22,300 miles (36,000km) from the Earth.
'But it could take decades before we see practical application of the technology - maybe in the 2040s or later,' he said.
'There are a number of challenges to overcome, such as how to send huge structures into space, how to construct them and how to maintain them.'
The idea of space-based solar power generation emerged among US researchers in the 1960s and Japan's SSPS programme, chiefly financed by the industry ministry, started in 2009, he said.
COULD A SOLAR FARM IN SPACE POWER OUR FUTURE?
Space-based solar power – once the stuff of science-fiction – could be available sooner than expected if Japan has its way
Solar power has had a difficult start on Earth thanks to inefficient panels and high costs. But in space, scientists believe it could transform the way we generate energy.
Now, the space-based solar power – once the stuff of science-fiction – could be available sooner than expected if Japan has its way.
Within 25 years, the country plans to make space-based solar power a reality, according to a proposal from the Japan Aerospace Exploration Agency (Jaxa).
In a recent IEEE article by Susumu Sasaki, a professor emeritus at Jaxa, outlined the agency's plans create a 1.8 mile long (3 km) man-made island in the harbour of Tokyo Bay.
The island would be studded with 5 billion antennas working together to convert microwave energy into electricity.
The microwaves would be beamed down from a number of giant solar collectors in orbit 22,400 miles (36,000 km) above the Earth.
Resource-poor Japan has to import huge amounts of fossil fuel.
It has become substantially more dependent on these imports as its nuclear power industry shut down in the aftermath of the disaster at Fukushima in 2011.
In a separate project, a Japanese firm last year revealed plans to cover the moon in a huge swathe of solar panels and use them to power homes here on Earth.
Shimizu Corporation's Luna Ring project would stretch almost 6,790 miles (11,000km) around the moon's equator and a field of solar panels would form a belt.
Energy captured by these panels would then be sent to Earth using microwaves and laser lights could be beamed directly to countries where it is needed.
According to the plans, the project would produce around 13,000 terrawatts of continuous solar energy. At present, the world's population consumes about 15 terawatts of power each year.
The company claims the plans would not only provide an 'almost inexhaustible' energy supply, it would stop the rise of global warming caused by carbon dioxide from current energy sources.
Shimizu Corporation's Luna Ring project would stretch almost 6,790 miles (11,000km) around the moon's equator and a field of solar panels would form a belt
 |
| Totality! The 2012 total solar eclipse as seen from Australia. Credit and copyright: www.hughca.com. |
Excerpt from universetoday.com
The first of two eclipse seasons for the year is upon us this month, and kicks off with the only total solar eclipse for 2015 on Friday, March 20th.
And what a bizarre eclipse it is. Not only does this eclipse begin just 15 hours prior to the March equinox marking the beginning of astronomical spring in the northern hemisphere, but the shadow of totality also beats path through the high Arctic and ends over the North Pole.
An animation of the March 20th eclipse. Credit: NASA/GSFC/AT Sinclair.
Already, umbraphiles — those who chase eclipses — are converging on the two small tracts of terra firma where the umbra of the Moon makes landfall: the Faroe and Svalbard islands. All of Europe, the northern swath of the African continent, north-central Asia and the Middle East will see a partial solar eclipse, and the eclipse will be deeper percentage-wise the farther north you are .
2015 features four eclipses in all: two total lunars and two solars, with one total solar and one partial solar eclipse. Four is the minimum number of eclipses that can occur in a calendar year, and although North America misses out on the solar eclipse action this time ’round, most of the continent gets a front row seat to the two final total lunar eclipses of the ongoing tetrad on April 4th and September 28th.
How rare is a total solar eclipse on the vernal equinox? Well, the last total solar eclipse on the March equinox occurred back in 1662 on March 20th. There was also a hybrid eclipse — an eclipse which was annular along a portion of the track, and total along another — on March 20th, 1681. But you won’t have to wait that long for the next, as another eclipse falls on the northward equinox on March 20th, 2034.
The path of the March 20th eclipse across Europe, including start times for the partial phases, and the path of totality, click to enlarge. For more maps showing the percentage of occlusion, elevation, and more, click here. Credit: Michael Zeiler/GreatAmercianEclipse.com.
The March 20th eclipse also occurs only a day after lunar perigee, which falls on March 19th at 19:39 UT. This is also one of the closer lunar perigees for 2015 at 357,583 kilometres distant, though the maximum duration of totality for this eclipse is only 2 minutes and 47 seconds just northeast of the Faroe Islands.
Views from selected locales in Europe and Africa. Credit: Stellarium.
This eclipse is number 61 of 71 in solar saros series 120, which runs from 933 to 2754 AD. It’s also the second to last total in the series, with the final total solar eclipse for the saros cycle occurring one saros later on March 30th, 2033.
What would it look like to sit at the North Pole and watch a total solar eclipse on the first day of Spring? It would be a remarkable sight, as the disk of the Sun skims just above the horizon for the first time since the September 2014 equinox. Does this eclipse occur at sunrise or sunset as seen from the pole? It would be a rare spectacle indeed!
An equinoctal eclipse as simulated from the North Pole. Credit: Stellarium.
Practicing eclipse safety in Africa. Credit: Michael Zeiler/GreatAmericanEclipse.com
A solar filtered scope ready to go in Tucson, Arizona. Credit: photo by author.
The view of totality and the planets as seen from the Faroe Islands. Credit: Starry Night.
Solar activity is also another big variable. Witnesses to the October 23rd, 2014 partial solar eclipse over the U.S. southwest will recall that we had a massive and very photogenic sunspot turned Earthward at the time. The Sun has been remarkably calm as of late, though active sunspot region 2297 is developing nicely. It will have rotated to the solar limb come eclipse day, and we should have a good grasp on what solar activity during the eclipse will look like come early next week.
And speaking of which: could an auroral display be in the cards for those brief few minutes of totality? It’s not out of the question, assuming the Sun cooperates. Of course, the pearly white corona of the Sun still gives off a considerable amount of light during totality, equal to about half the brightness of a Full Moon. Still, witnessing two of nature’s grandest spectacles — a total solar eclipse and the aurora borealis — simultaneously would be an unforgettable sight, and to our knowledge, has never been documented!
We also put together some simulations of the eclipse as seen from Earth and space:
Note that an area of southern Spain may witness a transit of the International Space Station during the partial phase of the eclipse. This projection is tentative, as the orbit of the ISS evolves over time. Be sure to check CALSky for accurate predictions in the days leading up to the eclipse.
The ISS transits the Sun during the eclipse around 9:05 UT as seen from southern Spain. Credit: Starry Night.
Excerpt from space.com
by Mike Wall
Is it time to take the search for intelligent aliens to the next level?
For more than half a century, scientists have been scanning the heavens for signals generated by intelligent alien life. They haven't found anything conclusive yet, so some researchers are advocating adding an element called "active SETI" (search for extraterrestrial intelligence) — not just listening, but also beaming out transmissions of our own designed to catch aliens' eyes.
Active SETI "may just be the approach that lets us make contact with life beyond Earth," Douglas Vakoch, director of interstellar message composition at the SETI Institute in Mountain View, California, said earlier this month during a panel discussion at the annual meeting of the American Association for the Advancement of Science (AAAS) in San Jose.
Seeking contact
Vakoch envisions using big radio dishes such as the Arecibo Observatory in Puerto Rico to blast powerful, information-laden transmissions at nearby stars, in a series of relatively cheap, small-scale projects.
"Whenever any of the planetary radar folks are doing their asteroid studies, and they have an extra half an hour before or after, there's always a target star readily available that they can shift to without a lot of extra slough time," he said.
The content of any potential active SETI message is a subject of considerable debate. If it were up to astronomer Seth Shostak, Vakoch's SETI Institute colleague, we'd beam the entire Internet out into space.
"It's like sending a lot of hieroglyphics to the 19th century — they [aliens] can figure it out based on the redundancy," Shostak said during the AAAS discussion. "So, I think in terms of messages, we should send everything."
While active SETI could help make humanity's presence known to extrasolar civilizations, the strategy could also aid the more traditional "passive" search for alien intelligence, Shostak added.
"If you're going to run SETI experiments, where you're trying to listen for a putative alien broadcast, it may be very instructive to have to construct a transmitting project," he said. "Because now, you walk a mile in the Klingons' shoes, assuming they have them."
Cause for concern?
But active SETI is a controversial topic. Humanity has been a truly technological civilization for only a few generations; we're less than 60 years removed from launching our first satellite to Earth orbit, for example. So the chances are that any extraterrestrials who pick up our signals would be far more advanced than we are.This likelihood makes some researchers nervous, including famed theoretical physicist Stephen Hawking.
"Such advanced aliens would perhaps become nomads, looking to conquer and colonize whatever planets they could reach," Hawking said in 2010 on an episode of "Into the Universe with Stephen Hawking," a TV show that aired on the Discovery Channel. "If so, it makes sense for them to exploit each new planet for material to build more spaceships so they could move on. Who knows what the limits would be?"
Astrophysicist and science fiction author David Brin voiced similar concerns during the AAAS event, saying there's no reason to assume that intelligent aliens would be altruistic.
"This is an area in which discussion is called for," Brin said. "What are the motivations of species that they might carry with them into their advanced forms, that might color their cultures?"
Brin stressed that active SETI shouldn't be done in a piecemeal, ad hoc fashion by small groups of astronomers.
"This is something that should be discussed worldwide, and it should involve our peers in many other specialties, such as history," he said. "The historians would tell us, 'Well, gee, we have some examples of first-contact scenarios between advanced technological civilizations and not-so-advanced technological civilizations.' Gee, how did all of those turn out? Even when they were handled with goodwill, there was still pain."
Out there already
Vakoch and Shostak agreed that international discussion and cooperation are desirable. But Shostak said that achieving any kind of consensus on the topic of active SETI may be difficult. For example, what if polling reveals that 60 percent of people on Earth are in favor of the strategy, while 40 percent are opposed?"Do we then have license to go ahead and transmit?" Shostak said. "That's the problem, I think, with this whole 'let's have some international discussion' [idea], because I don't know what the decision metric is."
Vakoch and Shostak also said that active SETI isn't as big a leap as it may seem at first glance: Our civilization has been beaming signals out into the universe unintentionally for a century, since the radio was invented.
"The reality is that any civilization that has the ability to travel between the stars can already pick up our accidental radio and TV leakage," Vakoch said. "A civilization just 200 to 300 years more advanced than we are could pick up our leakage radiation at a distance of several hundred light-years. So there are no increased dangers of an alien invasion through active SETI."
But Brin disputed this assertion, saying the so-called "barn door excuse" is a myth.
"It is very difficult for advanced civilizations to have picked us up at our noisiest in the 1980s, when we had all these military radars and these big television antennas," he said.
Shostak countered that a fear of alien invasion, if taken too far, could hamper humanity's expansion throughout the solar system, an effort that will probably require the use of high-powered transmissions between farflung outposts.
"Do you want to hamstring all that activity — not for the weekend, not just shut down the radars next week, or active SETI this year, but shut down humanity forever?" Shostak said. "That's a price I'm not willing to pay."
So the discussion and debate continues — and may continue for quite some time.
"This is the only really important scientific field without any subject matter," Brin said. "It's an area in which opinion rules, and everybody has a very fierce opinion."
 |
| WinSun claims that their new 3D printed five-story building is the tallest of its kind in the world. |
Excerpt from
Back in April, a team of Chinese construction workers used a 3D printer to construct houses. By day’s end, there were 10 standing. They were compact and fairly bare bones — nothing much to look at besides the “wow!” factor of there being as many as — count them — 10. But this time around, those same builders have taken the wraps off an achievement that’s roundly more impressive.
In Suzhou Industrial Park, adjacent to Shanghai, stands a five-story structure that the WinSun Decoration Design Engineering firm claims is “the world’s tallest 3D-printed building.” Next to it is the equally massive 3D-printed mansion, which measures 11,840 square feet. Like the previous buildings, the walls are comprised of a mix of concrete and recycled waste materials, such as glass and steel, and formed layer by printed layer. The company stated that the total cost for the mansion was roughly $161,000.
In a broader sense, this latest feat is yet another indication of how rapidly additive manufacturing techniques are advancing. Once used primarily as a means to quickly render miniature model versions of products, the technology has reached a point where large-scale printers are now capable of making life-sized working creations, such as automobiles, in mere days. For instance, it took less than 48 hours for start-up Local Motors to print a two-seater called the Strati into existence and drive it off the showroom.
Many of these designs, however, typically don’t amount to much beyond being passion projects meant to push 3D printing into new frontiers and drum up some publicity along the way. One example of this is the massive 3D Print Canal House that’s being constructed entirely on-site along a canal in Amsterdam, a process that’s slated to take longer and is less feasible than standard construction, Phil Reeves of UK-based 3D printing research firm Econolyst recently told CNN.
More promising, though, is a system developed by Behrokh Khoshnevis, a University of Southern California engineering professor. His concept machine, called Contour Crafting, involves a clever combination of mechanical cranes and 3D layering to print and assemble entire homes simultaneously — complete with insulation and indoor plumbing — in less than a day.
The approach employed by WinSun isn’t anywhere near that level of sophistication, but it may well prove to be the most practical – at least thus far. There is some labor and equipment costs that comes from trucking in and piecing together the various sections on-site, though the manner in which it all comes together is comparable to the ease of prefab assembly. It’s also reportedly greener thanks to the addition of recycled materials.
To pitch the advantages of their technology, the company held a news conference to announce that they had taken on orders for 20,000 smaller units as well as highlight some significant cost-cutting figures. According toindustry news site 3Der:
The sheer size of the printer allows for a 10x increase in production efficiency. WinSun estimates that 3D printing technology can save between 30 and 60 percent of building materials and shortens production times by 50 to even 70 percent, while decreasing labor costs by 50 up to even 80 percent. Future applications include 3D printed bridges or tall office buildings that can be built right on site.
WinSun did not respond to a request to disclose how they arrived at those numbers, but Enrico Dini, an Italian civil engineer and chairman of competing start-up Monolite, says that he suspects the calculations may be a tad bit inflated. Still, he emphasized that his own data does back up the claim that, compared to conventional methods, layering may boost overall efficiency.
“It would be very difficult to fabricate such large sections with traditional concrete casting,” he says. “With 3D printing, you have a lot less waste because you’re only printing out as much material as you need and you can custom shape whole sections on the spot, which can be a big challenge.”
WinSun’s 3D-printed villa has several rooms and has been deemed to be up to China’s national safety standards.
One major concern is whether these large-scale dwellings can hold up over time against the elements. According to 3Der, Ma Rongquan, chief engineer of China Construction Bureau, inspected the building’s structural integrity and found them to be up to code, but was careful to note that state officials have yet to establish specific criteria for assessing the long-term safety of 3D printed architecture.
And as Dini, who supports the technology, points out, there is the possibility that the use of additive manufacturing may pose some degree of risk. “The only issue is that as the layers of concrete are bonded together, they’re drying at slightly different rates and that’s not very ideal,” he explains. “So there’s maybe a higher chance of it fracturing at the contact point if there’s a strong enough force at play.”
Regardless, Dini says he’d feel completely safe going inside any floor of either building since construction materials used today are likely to contain special additives to enhance strength and resistance. One such formulation, fiber-reinforced Ductal, has been shown in some tests to be 10 times stronger and last twice as long as regular concrete. He stressed that walls should also be tested to ensure that other properties, such as acoustics, ventilation and thermal insulations are on par with existing buildings.
“In Italy, building standards are extremely strict,” he noted. “But I can’t say I can say the same about China.”
If consciousness is just the workings of neurons and synapses, how do we explain the phenomenon of near-death experience? By some accounts, about 3% of the U.S. population has had one: an out-of-body experience often characterized by remarkable visi...
St. Mark’s Episcopal Church, built in 1868, is considered a historical landmark in Cheyenne, Wyoming. It’s also rumored to be haunted, and its alleged resident ghost has a bizarre origin story.
In 1886, plans were made to construct a new tower for the church. Two Swedish stonemasons were hired for the job, but they both mysteriously disappeared before the tower was finished. Because of this setback, the tower went unfinished until 1927.
The problem was the unexplained eerie happenings that started to occur inside the church, along with sightings of a mysterious ghostly figure. Whenever construction was planned on the tower, workers often became too frightened to finish the job. The workmen were even granted permission to build a private isolated room to accommodate their ghostly friend.
Decades later, Reverend Eugene Todd was serving as pastor at St. Mark’s when he received a surprise explanation for these supernatural occurrences. He had been summoned to a nursing home in Denver, where an elderly dying patient had requested confession with him. The man claimed he was one of the two Swedish stonemasons who had mysteriously vanished while working on the church many years ago.
Apparently, the other stonemason had accidentally fallen to his death in the unfinished bell tower. His partner was terrified that he would be blamed for the death, so he decided to entomb the body under cement inside an unfinished wall section before fleeing the area. Although the missing stonemason’s body has never been found, many people found the old man’s story credible and believe that the stonemason’s ghost haunts the church.
This work is licensed under a Creative Commons Attribution 4.0
International License.
unless otherwise marked.
Terms of Use | Privacy Policy
— Up ↑ —
Comments